| Specification |
| ● |
Can be directly embedded in a combination of hydraulic line pressure test port valve。 |
| ● |
The roots of pulse pressure gauge with pressure for a buffer, a special throttle surge pressure。 |
| ● |
Even if the stacked combination valve, the pressure gauge is not between the contacts。 |
| ● |
Completely sealed by pressure gauge 100% glycerin solution in the viscous resistance, than in the past to mechanical vibration of the buffer pointer swing. Boer-hole pipe and can buffer the activities of products than before the pulse pressure increased fluid absorption。 |
| ● |
100% glycerin solution also play a lubrication pressure gauge internal bearings, wear parts such as gear parts, and improve the durability of the internal organization. And to prevent corrosion of internal components。 |
| ● |
Security measures imposed, so even if Bohr hole pipe ruptured, a transparent front plate will not be flying, the safety cap from the oil discharge operation。 |
| ● |
Outer transparent sheet marked with a green safety, so you can simply set the pressure range。 |
| ● |
As selection criteria, select the maximum level for the pressure range you use more than 2 times the pressure gauge。 |
| |
| Use of fluid |
General petroleum actuation oil and water - glycol category for mobile oil, phosphate actuation oil, water, air |
| Accuracy |
±3％／F.S |
| Operating temperature range |
-5～40℃ |
| Instruction error |
±0.3％／10℃ |
| Enclose liquid |
Glycerol solution100％ |
| Allow the vibration range |
0～7G |
| Net weight |
110g |
| Special specifications |
●Calibration plate with color display
●Special calibration (paid production version of the film)
●Cold to specifications (temperature range of -15 ~ 60 ℃, into silicone oil) |
 |
| ● |
According to the shape, size, pressure range of combinations, and some models can not produce, so please refer to the specifications of various models to choose table。 |
| ● |
Please vertically installed pressure gauge glycerin. Other than the installation of a vertical position, then there will be direct precision disorders, the risk of leakage of sealing liquid glycerin。 |
| ● |
Can not make a special scale handwritten board pressure gauge glycerin。 |
| ● |
Security mark all at the factory set to 0。 |
| ● |
Transparent polycarbonate front plate is the system (PC), so please be careful not to directly touch the organic solvents. The occasion of the painting operation, please be covered with polyethylene bags of paint coating after treatment。 |
| ● |
Maximum pressure in the 1MPa below, please cut off the front after the use of helmets。 |
| ● |
1MPa following gauge torque tube as Bohr hole weak, so the temperature inside the pressure gauge (internal pressure change) will affect the direction accuracy. Protruding through the cut off part of the security cover, can keep the balance of internal pressure and atmospheric pressure, precision. However, after cutting off the safety cap, there is the risk of leakage of glycerol solution, so be sure to use the safety cover facing。 |
US-series
